- Apply the sealant to clean, degreased surfaces. For degreasing and cleaning, KUDO® Universal degreaser is recommended. For winter works, clean the surface of ice and frost. The sealant can be applied to both dry and moist surfaces. No drops of water allowed. Caution! Do not use when it rains, snows or in high humidity (>70%).
- Recommended ambient application temperature: +5°C to +35°C; application from -20°C to +35°C is permitted. The sealant temperature should be +20°C to +25°C.
- Ready to use. Do not dilute with water, as this may cause sagging, loss of adhesion and cracking.
- Protect adjacent surfaces with masking tape for a neat finish.
- Apply a sealant layer 4.5 to 5 mm thick, with at least 3 mm of contact on both the opening and frame surfaces.
- Level the sealant with a putty knife or a brush before the surface film has formed.
- Remove the masking tape immediately after smoothing.
- After application, prevent the sealant from being in contact with water for at least 6 hours.
- Tools and surfaces should be washed with water immediately after use, cured sealant should be removed using mechanical methods.
*When using solvent-based paints, run a test.
