- It is recommended that surfaces not intended for treatment should be protected.
- For best results, apply the composition at an ambient temperature of at least +10°C.
- Shake the can well for 2-3 minutes before use.
- Spray 2-3 thin coats from a distance of 25-30 cm onto a clean surface that is free of rust and grease, allowing each coat to dry for 10-15 minutes at +20°C. Time until ready to handle — 2 hours at +20°C; then the coating can be painted over.
Attention! After use, turn the can upside down and press the spray head (nozzle) until the composition stops coming out in order to prevent the nozzle from clogging.








