- Mask surfaces that are not to be painted to protect them from overspray.
- To ensure the best results, apply the enamel at a temperature of at least +10°C.
- Remove the cap from the can. To do this, insert a flat-blade screwdriver with a 7-10 mm blade into the opening in the cap. Turn the screwdriver a quarter turn, resting the blade on the rim of the can. Do not insert the screwdriver too deep, so as not to damage the dome of the can!
- Shake the can well for 2-3 minutes before use.
- Apply the enamel onto a clean, dry and degreased surface from a distance of 25-30 cm in 2-3 coats, letting each coat dry for 10 minutes.
- Touch-dry — 15-20 minutes; fully dry at +20°C — at least 2 hours. The coating should not be used earlier than 48 hours after application.
Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.
