8-in-1 Multipurpose Hybrid Polymer Adhesive and Sealant HOME
KBK-561
One-component multipurpose adhesive and sealant for bonding and sealing a wide range of materials, including plastics, metal, glass, wood, ceramics and concrete, thanks to its excellent adhesion. For indoor and outdoor use.
Highly elastic, resistant to UV radiation and weathering, well suited for bonding materials with different coefficients of thermal expansion, does not yellow.
KUDO® HOME KBK-561 hybrid polymer (silane modified polymer) adhesive and sealant is chemically neutral, does not react with the bonded materials, does not corrode metals and is suitable for bonding items made of sensitive materials. Odorless, environmentally safe, non-toxic and non-flammable, free of isocyanates and solvents.
KBK 561, KBK-561
Colors
-
White
KBK-561
Benefits
- Works equally well as a sealant and as an adhesive.
- Shore A hardness (GOST 263-75) – 50.
- High elasticity and deformation resistance.
- Service temperature range: -50°C to +100°C.
- Excellent primerless adhesion to most building materials.
- Chemically neutral, non-corrosive.
- Resistant to UV radiation.
- Coverage: approx. 20-22 linear meters with a 4 mm bead.
Additional information
| Full product name | Multipurpose hybrid polymer adhesive sealant 8 in 1 HOME |
|---|---|
| Colors | White KBK-561 |
| Shore A hardness | 50 (GOST 263‑75) |
| Coverage | 20-22 linear meters at a bead diameter of 4 mm |
| Chemical base | Hybrid polymer |
| Product type | Adhesive sealants |
| Pack size | 280 ml |
| Components | 1-component |
| Information on ingredients | hybrid polymer, mineral fillers, functional additives, pigments. |
| Technical conditions | 20.30.22-001-01324561-2019 |
| Storage | Store in tightly closed original packaging in a dry place at temperatures from -20°C to +25°C. |
| Shelf life | 1 year |
| Series | KUDO® HOME |
Application
- It is recommended to apply the product at an ambient temperature from +5°C to +35°C.
- Apply the adhesive and sealant to clean, degreased surfaces. For degreasing and cleaning, KUDO® Universal degreaser is recommended.
- For neat work, use masking tape and remove it immediately after applying the adhesive.
- Cut off the tip of the cartridge above the screw thread, screw on the nozzle, unscrew the nozzle cap and cut the nozzle at a 45° angle to make an opening large enough for dispensing.
- Use a caulking gun for application. Apply the product as a continuous bead.
- Tool the resulting joint with a spatula dampened with soapy water.
- Tack-free time is at least 20 minutes. Curing rate – about 3.5 mm per day (at 23 °C and 50 % humidity).
- Clean surfaces soiled with fresh adhesive and sealant with KUDO® Multipurpose sealant remover. Remove the cured material mechanically.
- Bonded items can be used at temperatures from -50°C to +100°C.
Note! Not for use on surfaces that come into contact with food. Not for continuous water immersion. When solvent-based paints are used, carry out a test first.
