News

The KUDO^® professional special products range now includes three PVC cleaners. All three cleaners are part of KUDO^® MONTAGE SYSTEM – a set of products for installing windows and glazed units.

SMC-005 PVC Cleaner №5, highly soluble, removes scratches, shallow cracks and scuff marks from surfaces made of opaque rigid PVC, polystyrene, ABS and acrylic glass.

SMC-010 PVC Cleaner №10, low soluble, removes heavy soiling from plastic surfaces: installation markings, labeling, rubber marks, protective film, tape, adhesive residues, bitumen, fresh silicone and fresh PU foam. It is effective when preparing surfaces for bonding.

SMC-020 PVC Cleaner №20, insoluble with antistatic, cleans plastic surfaces without softening them. It removes dust, installation markings and factory labeling, rubber marks, protective film, tape, adhesive residues, bitumen, fresh silicone and fresh PU foam. It is effective when preparing surfaces for bonding. Its antistatic properties keep the surface from becoming dirty again.

Professional PVC cleaners are supplied in metal canisters of 1000 ml.

Our range has a new product – Construction adhesive “Liquid nails” FIX-N-FLEX DONEWELL^® based on hybrid polymers.

DONEWELL^® adhesive is designed to form high-strength, permanently elastic bonded and sealed joints.

It is used to install structural and decorative elements (mirrors, window sills, door thresholds, air conditioning and ventilation systems, stair treads and the like) on concrete, brick, stone, metal, wooden and other surfaces (except PE, PP and PTFE surfaces).

Our range has new products – Multipurpose acrylic adhesive for repair and installation “Invisible seam” KBT‑300, 200 ml and KBK‑300, 280 ml.

This high-quality multipurpose acrylic adhesive is designed for bonding items made of wood, chipboard, fiberboard, EPS, XPS and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces. It suits assembling wooden structures and bonding drywall, OSB panels, decorative elements, window sills and insulation of various types.

Our range has a new product – Multipurpose acrylic adhesive “Liquid nails”, frost-resistant KBT-301, 200 ml.

This high-quality multipurpose acrylic adhesive is designed for bonding items made of wood, chipboard, fiberboard, EPS, XPS and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces.

Our range has a new product – Multipurpose sealant remover KRS-920, 210 ml.

A highly effective product that quickly softens and removes residues of sealants of any type (silicone, acrylic and so on), adhesive, grease, oil and some paints and varnishes. It is recommended both for complete removal and for preparing a surface before applying sealant or adhesive.

The KUDO^® range has a new product – the multipurpose low-modulus joint adhesive sealant based on hybrid polymers in a 600 ml sausage pack, white KBP 541 and gray KBP 543.

The KUDO^® range of NEXTGEN construction and industrial adhesive sealants based on hybrid polymers now includes a low-modulus (LM) adhesive sealant with a Shore A hardness of 25 (GOST 263‑75). The one-component multipurpose NEXTGEN construction sealant is designed to form elastic, high-strength sealing and bonding joints exposed to vibration and deformation.

Our range has a new product – Sanitary silicone sealant, 85 ml.

The sealant is now supplied not only in 280 ml cartridges but also in 85 ml tubes. This pack is convenient for local repairs: one tube fills 6–6.5 linear meters of joint with a 4 mm bead. Two versions are available: transparent and white.

Our range has a new product – General purpose acrylic sealant DONEWELL^®.

This high-quality general purpose acrylic sealant is designed for sealing connection joints and gaps between stairs, walls, ceilings, baseboards, window sills, wooden and metal window frames, concrete and brickwork. It is suitable for repairing and concealing defects on any surface where joint movement does not exceed 15%. For interior use.

Acrylic sealants started to appear in the USA and Europe in the late 1970s. No exact date of their "birth" was recorded: they were the result of the evolution of acrylic fillers, as manufacturers gradually changed the formulation of fillers and gave them more and more of the properties of a sealant.

Acrylic sealants are made on the basis of a water dispersion of an acrylic or an acrylic-styrene polymer. The properties of the resulting sealant depend largely on the quality of that base. A sealant also contains a mineral filler (most often ground calcium carbonate), a thickener, a plasticizer, a biocide and a coloring pigment (if the sealant is colored).

The KRAFT series has a new product, Universal degreaser KU-9102.
A high-quality formulation based on non-aggressive solvents. Degreaser is used to prepare various parts for painting to clean and degrease the surface.