News

New product! Acrylic joint sealants PROFF in sausage packs

The KUDO® range has new products – Acrylic vapor-barrier joint sealant, interior PROFF in a 600 ml sausage pack SMP 311 and Acrylic vapor-permeable joint sealant, exterior PROFF in a 600 ml sausage pack SMP 351.

Vapor-permeable and vapor-barrier acrylic sealants are used when installing window frames. They have excellent adhesion to brick, concrete, wood, metals, PVC and other building materials. They have a wide service temperature range: from –30 °C to +70 °C, and may be applied at –20 to +35 °C. In transport they withstand up to 7 freezing cycles (a cycle of no more than 24 hours) at temperatures down to –20 °C, or a single freezing down to –20 °C for no longer than 7 days.


[New Product] Anti slip coating

The KRAFT range has a new product – the anti slip coating spray KU-5401.
This high-quality product creates a long-lasting, wear-resistant non-slip finish on steps, paving slabs, floors, hand tools, truck beds and similar surfaces.



New KUDO® cyanoacrylate adhesives

The KUDO® adhesives range has three new products. Two of them are the liquid cyanoacrylate adhesives KBT-010 (3 gram pack) and KBT-050 (20 gram pack).
Both adhesives set almost instantly and form a very strong, rigid bond line 0.1 mm thick.

The third new product is the cyanoacrylate gel adhesive KBT-020 (3 gram pack). Thanks to its gel formula the adhesive does not run off vertical surfaces and can bond even surfaces that do not fit tightly together. Setting speed and adhesion remain just as high.


New window installation system KUDO® MONTAGE SYSTEM
KUDO® window installation system

We present a complete solution for the accurate and reliable installation of glazed building envelope units — KUDO® MONTAGE SYSTEM.

KUDO® MONTAGE SYSTEM is a set of professional KUDO® materials combined into a single system for installing, fixing and sealing the perimeter joints of window (balcony and door) units in openings in the external envelope of buildings and structures. The KUDO® installation system makes it possible to do the job accurately and quickly in full compliance with GOST 30971‑2012 and STO NOSTROY 2.23.62‑2012.


All-new foam adhesive PUR-O-FIX X15+ EXTRA FIX

Introducing the updated foam adhesive PUR-O-FIX X15+ EXTRA FIX with HYBRID CELL hybrid cells.

Thanks to the hybrid cells, the new foam adhesive partly collapses on application, which gives extremely high adhesion to most building materials. PUR-O-FIX X15+ has very low post-expansion and does not shift the bonded parts out of their optimal position while it cures. The updated foam adhesive works well on vertical surfaces and does not run when applied.