- It is recommended to test the cleaner for compatibility with plastics, especially colored plastics.
- For best results, apply at an ambient temperature above +10°C.
- Clean the surface from dust and dirt. If it is very dusty, use PVC Cleaner No. 20.
- In case of deep scratches, sand the surface with 400-grit sandpaper, then clean the dust with PVC Cleaner No. 20.
- Apply PVC Cleaner No. 10 and clean the surface with a dye-free, lint-free cellulose or cotton cloth. Wipe in one direction rather than in circles. For polishing and restoring, use PVC Cleaner No. 5.
PVC Cleaner No. 10, Mildly Dissolving
SMC-010
Professional cleaner for polyurethane and rigid PVC components, including window frames, window sills, plastic sheets, profiles, and ventilation and electrical ducts. Penetrates the upper layers of the plastic to soften and remove stubborn stains, installation markings, and residues of rubber, protective film, adhesive tape, adhesives, bitumen, uncured silicone and PU foam. Highly effective for surface preparation before bonding. Compatible with most plastics.
KUDO® MONTAGE SYSTEM is a matched set of professional materials for installing, fixing and sealing the perimeter joints of window, balcony and door units.
| Series | KUDO® PROFF |
|---|---|
| Full product name | PVC Cleaner №10, low soluble |
| Product type | PVC cleaner |
| Pack size | 1000 ml |
| Information on ingredients | aliphatic hydrocarbons more than 30%. |
| GOST | 32478-2013 |
| Storage | Store in covered, dry, ventilated warehouses at a temperature of +5°C to +25°C, at least 1 m away from heaters. |
| Shelf life | 2 years |
