- It is recommended to protect surfaces that are not to be primed.
- For best results, apply the primer at a minimum ambient temperature of +10°C.
- Test the product on an inconspicuous area before use.
- Clean and degrease the surface thoroughly.
- Shake well for 2-3 minutes before use.
- Dry sand old paint finishes with P180-400 abrasive, then degrease.
- Spray the primer from a distance of 25-30 cm, in 1-2 coats, with intercoat drying 3-5 minutes at +20°C.
- Drying time: 60 minutes at +20°C or 20 minutes at +60°C. Coating thickness: 15-20 µm per coat.
- Sanding before the next coating is not required, degreasing is enough.
- Before the topcoat is applied, it is recommended to overcoat the isolating primer with a filler primer.
- Do not apply polyester products over the isolating primer.
Warning! After use, to avoid clogging the spray head, turn the can upside down and spray until the primer stops coming out.
