- For best results, apply the product at a minimum ambient temperature of +10°C.
- Before priming, the substrate must be cleaned, dried, degreased and dry sanded with an abrasive (P80-P320, depending on the substrate to be painted).
- Protect the surfaces that are not to be primed.
- Thin to the required viscosity with a thinner.
- Apply 1-2 coats with intercoat drying 5-10 minutes at +20°C.
1K Acid Etch Primer, Chromate-Free
1K fast-drying acid etch anti-corrosion primer provides a high level of corrosion resistance and good adhesion to ferrous, galvanized and stainless steel and to aluminum. Chromate-free.
1K acid etch primer KUDO® KU-2513 must be overcoated with a filler primer.
Colors
-
KU-2513
Green
| Chemical base | Synthetic resins |
|---|---|
| Primer technology | Acid-based |
| Product type | Primers |
| Intercoat drying | 5-10 min |
| Drying time | 30 min (at +20°C) |
| Surface preparation & restrictions | Steel (mild, galvanized, stainless), aluminum alloys. |
| Recoat with | Acrylic, alkyd and urethane alkyd paints and primers, two-component polyurethane paints and primers. |
| Sanding | No sanding required. Do not apply polyester fillers over it. |
| Pack size | 500 ml |
| Information on ingredients | Synthetic modified resins, organic solvent blend, pigments, fillers, functional and anti-corrosion additives. |
| Shelf life | 2 years |
| Technical conditions | 20.30.22-037-53934955-2021 |
