Seamless Elastic Acrylic Waterproofing Membrane PROFF, 2.5 kg
KIB-345.1
Ready-to-use, one-component waterproofing membrane based on an acrylic dispersion with fungicidal additives. Designed for waterproofing walls and floors before tiling. Forms a durable, elastic, watertight barrier.
KUDO® PROFF KIB-345.1 waterproofing can be used in wet areas: bathrooms, showers, restrooms, kitchens, saunas, spa areas, balconies, etc.
The blue color of the material makes it possible to check the continuity and the thickness of the coat. When dry, it forms a waterproofing layer 0.8-1 mm thick. For indoor and outdoor use.Bathroom waterproofing. Waterproofing for tiles. KIB-345-1 KIB 345
Benefits
- Excellent adhesion to most construction materials: concrete, cement-sand renders, gypsum boards and blocks, dry screeds, gypsum plasters, brickwork, drywall, construction plywood, wood, etc.
- Dries to a durable, elastic coating.
- Compatible with radiant floor heating.
- Bridges cracks up to 3 mm.
- Intercoat drying time is at least 4 hours (at +23°C and 50% relative humidity).
- Service temperature range from -30°C to +70°C.
- Before tiling, let the material dry completely, at least 12 hours.
Additional information
| Product type | Waterproofing membranes |
|---|---|
| Colors | Blue |
| Weight | 2.5 kg |
| Components | 1-component |
| Information on ingredients | styrene-acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Coverage | 0.7 kg/m² at a coating thickness of 0.5 mm |
| Coverage area | ≈2.6 m² |
| Underfloor heating | Compatible |
| Intercoat drying | 4 hours* |
| Technical conditions | 20.30.22-001-01324561-2019 |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. During transportation, up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -20°C are allowed, or a single freezing down to -20°C for not more than 7 days. Thawing is carried out without additional heating at +20°C to +25°C. |
| Shelf life | 2 years |
| Series | KUDO® PROFF |
Application
Apply the waterproofing membrane to clean, dry surfaces with a brush or a roller. For better adhesion, prime the surface with a waterproofing primer. Fill cracks and joints; irregularities over 5 mm must be leveled out. The surface must be free of water droplets.
- Apply at a substrate and air temperature of +5°C to +35°C and a material temperature of +20°C to +25°C.
- Apply at least two thin coats, the second at right angles to the first. Each coat must be no more than 0.5 mm thick. The waterproofing properties, strength and adhesion develop only after the material has dried completely.
- Seal the joints between adjoining surfaces with a suitable waterproofing tape.
- Tiling can start no earlier than 12 hours after the last coat of waterproofing. Use a C1 or C2 cementitious tile adhesive (EN 12004), depending on the type and format of the tile.
- Keep the container tightly closed during breaks in work.
- Clean tools and soiled surfaces with water immediately after use; cured material can only be removed mechanically.
Important! Do not use where the coating is in permanent contact with water (wells, swimming pools, fountains). Do not apply at high humidity (>70%). The material is ready to use, do not thin it with water: this can cause loss of adhesion and cracking.
