- Mask surfaces that are not to be painted to protect them from overspray.
- For best results, apply the paint at an ambient temperature of at least +10°C.
- Remove the cap from the can. To do this, insert a flat-blade screwdriver with a blade width of 7-10 mm into the opening in the cap. Turn the screwdriver a quarter turn, resting the blade on the rim of the can. Do not insert the screwdriver too deep, so that the dome of the can is not damaged.
- Shake the can well for 2-3 minutes before use.
- The paint is applied to a clean, dry, pre-primed and sanded surface. It can also be applied over existing paint (scuff-sand glossy surfaces until dull). KUDO® Alkyd spray primer is recommended for priming the surface.
- The paint is applied from a distance of 25-30 cm in 2-3 coats, with intercoat drying of 10-15 minutes at +20°C. Touch-dry at +20°C is at least 40 minutes, ready to handle at +20°C is at least 5 hours.
1. Insert a flat-blade screwdriver with a blade width of 7 to 10 mm into the opening in the cap.
2. Turn the screwdriver a quarter turn, resting the blade on the rim of the can. Do not insert the screwdriver too deep, so that the dome of the can is not damaged.
