- Mask surfaces that are not to be painted to protect them from overspray.
- For best results, apply the paint at an ambient temperature of at least +10°C.
- Shake the can well for 2-3 minutes before use.
- Rotate the spray nozzle to set the required spray pattern orientation (vertical, horizontal or any position in between).
- The paint is applied to a clean, dry, pre-primed and sanded surface. It can also be applied over existing paint (scuff-sand glossy surfaces until dull). KUDO® Alkyd spray primer is recommended for priming the surface.
- The paint is applied from a distance of 25-30 cm in 2-3 coats, with intercoat drying of 10-15 minutes at +20°C. Touch-dry at +20°C is at least 40 minutes, ready to handle at +20°C is at least 5 hours.
Attention! After use, turn the can upside down and spray until the paint stops coming out in order to prevent the nozzle from clogging.
Important! Further coats of paint must be applied either within 2 hours or after at least 2 weeks. No additional clear coat is required. Before use, we recommend reviewing the table of appropriate material combinations.
