The new line of adhesives and sealants

Alkyd RAL paint for profiled sheeting and metal roof tiles

SKU: KU-0xxxxR

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Эмаль RAL для металлочерепицы и профнастила
Видео по продукту

High quality fast-drying paint is intended for painting metal surfaces for various purposes, such as repairing defects and damages of polymer coating while installing metal tiles, profiled sheeting, drainage and ventilation systems, trade equipment, etc.

Complies with the RAL European color standards. Suitable for both indoor and outdoor use. Can be easily applied to hard-to-reach areas, and has good coverage.

The coating has excellent adhesion to the painted surface. It has a stable gloss and good resistance to impact, bending and other mechanical stresses. Provides reliable protection, high weather resistance and mechanical robustness, as well as a long service life of painted surfaces.

Technical Information





Intercoat drying

10-15 min

Dry to touch

40 min

Dry to handle

5 hours

For use on

Metal, Wood, Painted surface


≈ 2 м²


520 ml

Units per box

6 units

Box dimensions

205х137х205 mm

Box weight

2,327 kg

information on ingredients

модифицированная алкидная смола, пигменты, наполнители, функциональные добавки, ксилол, метилацетат, бутанол, пропан, бутан, диметиловый эфир

Shelf life

5 years, 8 years

Technical conditions


  • In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
  • To ensure the best results, the enamel should be applied at a minimum temperature of +10°C.
  • Shake the can well for 2-3 minutes before use.
  • Apply the enamel to a clean, dry, pre-primed and sanded surface. It also can be applied over old lacquers (glossy coatings must be preliminarily matted with sandpaper). KUDO® Primer is recommended for surface priming.
  • Spray 2-3 thin cross-coats from a distance of 21-25 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. Dry to Touch time a minimum of 40 minutes at +20°С. Dry to Handle time at +20°С is a minimum of 5 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed. It is advisable to take a look at the table of appropriate material combinations before use.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KU-0xxxxR. Categorie: Share: