Multipurpose Rubber Construction Adhesive, Clear DONEWELL®
DBK-407
One-component multipurpose rubber-based adhesive for repair and finishing work. It bonds most materials, including glass, metal, plastic, ceramics, wood, concrete, brick and cork.
The clear rubber construction adhesive DONEWELL® DBK-407 speeds up finishing work, is economical and easy to use. It can be applied at temperatures down to +5°C.
High initial tack. For interior and exterior use.
DBK 407, DBK-407
Colors
-
Transparent
DBK-407
Benefits
- Fast, strong bonding.
- Invisible elastic bond line.
- Excellent adhesion to wood, concrete, brick, stone, drywall, plastic and other building materials.
- Wide service temperature range: -30°C to +50°C.
- Initial tack: 200 kg/m² (20 g/cm²).
- Water resistant.
Additional information
| Full product name | Multipurpose rubber installation adhesive DONEWELL® DBK-407, transparent |
|---|---|
| Product type | Installation adhesives |
| Pack size | 310 ml |
| Components | 1-component |
| Information on ingredients | Synthetic rubber, organic solvents, processing additives. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +30°C in a dry place. |
| Shelf life | 18 months |
| Chemical base | Rubber |
| Series | DONEWELL® |
Application
- Provide adequate ventilation while working.
- Apply at an ambient temperature from +5°C to +35°C.
- Apply the adhesive to clean, dry surfaces free from grease.
- For neat work, use masking tape and remove it immediately after the adhesive has been applied.
- Cut off the cartridge tip above the thread, screw on the nozzle and remove the cap. Cut the nozzle at a 45° angle to obtain an opening of the required size.
- Use a caulking gun for application. Apply the adhesive in dots or as a continuous bead. Bring the parts together immediately after application, turning them slightly.
- Pull the surfaces apart, wait 1-2 minutes, then bring them together and press firmly.
- Open time: 5 minutes. Optimum properties are reached within 72 hours.
- Remove excess uncured adhesive with a cloth dampened with solvent. Remove cured adhesive mechanically.
- Bonded items can be used at temperatures from -30°C to +50°C.
Important! Not for use on surfaces that come into contact with food. Not for continuous water immersion.
