General-Purpose Acrylic Sealant DONEWELL®
DSK 30X
High quality general-purpose DONEWELL® acrylic sealant. Intended for sealing joints and gaps between stairs, walls, ceilings, skirting boards, window sills, wood and metal window frames, concrete and brickwork. Perfect for repairing and masking defects on any surface where joint movement is less than 15%. For indoor use.
Excellent adhesion to concrete, brick, stone, drywall and wood. Vapor-permeable, resistant to mold and fungi, and non-yellowing. Plasto-elastic and suitable for joints subject to movement; resists cracking and crumbling. Solvent-free.
Chemically neutral, non-corrosive to metals. Odorless. Easy to apply and clean. When fully cured it can be painted with water-based and oil-based paints. Not for continuous water immersion.
DSK 301, DSK-301
Colors
-
White
DSK 301
Benefits
- Resistant to UV radiation, cleaning agents and detergents.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC and other building materials.
- Chemically neutral, non-corrosive.
- High elasticity and movement capability.
- Service temperature range: -30°C to +70°C.
- Coverage: approx. 18-20 linear meters with a 4 mm bead.
Additional information
| Application | Multipurpose |
|---|---|
| Colors | White DSK-301 |
| Full product name | General purpose acrylic sealant, white |
| Chemical base | Acrylic |
| Product type | Sealants |
| Seasonality | All-season |
| Pack size | 260 ml |
| Components | 1-component |
| Information on ingredients | acrylic polymer, water, plasticizer, mineral filler, inorganic pigment, functional additives. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. During transportation, up to 7 freezing cycles (each cycle not more than 1 day) down to -20°C are allowed, or a single freezing down to -20°C for not more than 7 days. Thaw without additional heating at +20±5°C. |
| Shelf life | 2 years |
| Series | DONEWELL® |
Application
- It is recommended to apply the product at an ambient temperature from +5°C to +35°C, including the substrate temperature. The sealant temperature should be +20°C…+25°C.
- Apply the sealant to clean, dry, degreased surfaces.
- Protect adjacent surfaces with masking tape for a neat finish. Use a caulking gun for application.
- Cut off the tip of the cartridge above the screw thread, screw on the nozzle, unscrew the nozzle cap and cut the nozzle at a 45° angle to make an opening large enough for dispensing.
- Tool the sealant in the joint with a damp spatula. Soapy water is a good aid.
- Remove the masking tape immediately after smoothing.
- Clean tools with water, adding a cleaning agent if necessary. Remove excess uncured sealant with a damp cloth. Remove cured sealant mechanically.
- Ready to handle for a 3 mm thick layer – 48 hours (at 23 °C and 50 % humidity).
- Use paints and varnishes with film elasticity comparable to that of the sealant.
Do not use for joints that are permanently under water (swimming pools, aquariums). Do not apply at ambient temperatures below +5°C or in high humidity (>70%).
