Multipurpose Acrylic Adhesive “Liquid Nails”, Frost-Resistant DONEWELL® FIX-N-DECOR, 85 ml
DBT 301
High quality multipurpose acrylic adhesive DONEWELL® FIX-N-DECOR is designed for bonding items made of wood, chipboard, fiberboard, EPS, XPS and UPVC to concrete, brick, stone, metal, plastered and wooden surfaces. Ideal for assembling wooden structures and for bonding drywall, OSB boards, decorative elements, window sills and thermal insulation materials of various types.
Considerably speeds up finishing work, is economical and easy to use. Intended for indoor use. Not recommended for bathrooms and shower enclosures.
Solvent-free, non-toxic and non-flammable. Chemically neutral, does not corrode metals. Odorless. Easy to apply and clean off. Once fully dry, it can be painted over with water-based and oil-based paints.
DBT 301, DBT-301
Colors
-
White
DBT-301
Benefits
- Resistant to UV radiation, cleaning agents and detergents.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC and other building materials.
- High strength and moisture resistance.
- Chemically neutral.
- Wide service temperature range: from -30°C to +70°C.
- Can be painted over with water-based and oil-based paints.
Additional information
| Full product name | Multipurpose acrylic installation adhesive “Liquid nails” DONEWELL® FIX-N-DECOR, white |
|---|---|
| Colors | White DBT-301 |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 85 ml |
| Components | 1-component |
| Information on ingredients | acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Storage | Store in tightly closed and sealed original packaging at temperature from +5°C to +25°C in a dry warehouse room. Withstands 7 freeze-defrost cycles or a single freezing for 7 days at temperatures up to -30°C. Defrost at +20 (+/-5) °C. |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | DONEWELL® |
Application
- Apply at a temperature of +5°C to +25°C. The recommended temperature of the adhesive is +20°C to +25°C.
- Apply to clean, dry surfaces free from grease and dust. One of the surfaces must be porous. On porous materials a slightly damp surface is acceptable.
- Apply the adhesive in beads or in dots about 6 mm in diameter spaced 10-20 cm apart, depending on the complexity of the job.
- Apply the adhesive to one of the surfaces, bring the surfaces to be bonded together and press them firmly.
- If the part is positioned incorrectly, do not pull it off, correct its position by sliding it.
- Do not leave the tube open for more than 20 minutes.
- Tack-free time is 1 hour; the part can be repositioned within 30 minutes; full strength is reached after 48 hours (depending on the porosity of the bonded materials) at 23°C and 50% relative humidity.
- Remove excess uncured adhesive with a damp cloth. Clean tools with water, hands with soap and water.
- Cured adhesive can only be removed mechanically.
Important! Do not use in joints that are permanently under water. Do not apply at ambient temperatures below +5°C or at high humidity (>70%).
