Two-Component Silicone Secondary Sealant for Insulating Glass Units
KSD-953
High quality silicone sealant intended for forming the secondary seal in insulating glass units. Designed for application with semi-automatic and automatic two-part meter/mix dispensing equipment.
KUDO® KSD-953 sealant has excellent adhesion to glass, aluminum and stainless steel alloys, and excellent weathering durability. KSD 953, KSD-953
Colors
-
Black
KSD-953
Benefits
- Excellent adhesion to glass, aluminum and steel alloys.
- Two-component.
- Odorless.
- Fast cure.
- Non-sag: does not flow or slump in the joint.
- Colorfast and low dirt pick-up.
- Water resistant, resistant to most detergents and cleaning agents.
- UV resistant.
Additional information
| Application | Joint sealing, Specialty sealing |
|---|---|
| Colors | Black KSD-953 |
| Full product name | Two-component silicone sealant for secondary sealing of insulating glass units |
| Chemical base | Silicone |
| Components | 2-component |
| Product type | Sealants |
| Pack size | 190 + 19 l |
| Information on ingredients (part A) | Silicone polymer, plasticizers, fillers, modifying additives. |
| Information on ingredients (part B) | Curing agents, cure accelerators, plasticizers, fillers, modifying additives. |
| Technical conditions | 20.30.22-002-01324561-2025 |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place, away from heating appliances. Transportation temperature: from -20°C to +30°C. |
| Shelf life | 1 year |
| Series | KUDO® PROFF |
Application
- The sealant is a two-component product consisting of a base paste (Part A) and a curing agent paste (Part B). The polymer base and the curing agent must be mixed in a ratio of 10:1 by volume and 14:1 by weight.
- Increasing or reducing the dose of Part B respectively shortens or extends the working time and slows down or speeds up the strength build-up. For optimum physical properties, mix with an airless mixing system. Hand mixers and portable power mixers are not suitable for this sealant, because they entrap air in the material, and this affects the physical properties of the cured sealant. Recommended mixing temperature range: from +20°C to +30°C.
- Apply the sealant only to a dry surface completely free from dirt, grease, mortar residues, previously applied sealants, ice and frost. Clean tools with isopropyl alcohol or mineral spirits. Once cured, the sealant can only be removed mechanically.
