Two-Component Silicone Adhesive and Sealant for Structural Glazing PROFF
KBD-950
High quality silicone adhesive and sealant intended for structural bonding of insulating glass units to metal framing. Designed for application with semi-automatic and automatic two-part meter/mix dispensing equipment.
KUDO® PROFF KBD-950 adhesive and sealant has excellent adhesion to glass, aluminum and stainless steel alloys, and excellent weathering durability. KBD-950, KBD 950
Colors
-
Black
KBD-950
Benefits
- Excellent adhesion to glass, aluminum and steel alloys.
- Two-component.
- Odorless.
- Fast cure.
- Non-sag: does not flow or slump in the joint.
- Colorfast and low dirt pick-up.
- Water resistant, resistant to most detergents and cleaning agents.
- UV resistant.
Additional information
| Colors | Black KBD-950 |
|---|---|
| Application | Specialty sealing |
| Full product name | Two-component silicone adhesive sealant for structural glazing PROFF |
| Chemical base | Silicone |
| Components | 2-component |
| Product type | Adhesive sealants, Sealants |
| Pack size | 190 + 19 l |
| Information on ingredients (part A) | Silicone polymer, plasticizers, fillers, modifying additives. |
| Information on ingredients (part B) | Curing agents, cure accelerators, plasticizers, fillers, modifying additives. |
| Technical conditions | 20.30.22-002-01324561-2025 |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place, away from heating appliances. Transportation temperature: from -20°C to +30°C. |
| Shelf life | 1 year |
| Series | KUDO® PROFF |
Application
- The sealant is a two-component product consisting of a base paste (Part A) and a curing agent paste (Part B). The polymer base and the curing agent must be mixed in a ratio of 10:1 by volume and 14:1 by weight.
- Increasing or reducing the dose of Part B respectively shortens or extends the working time and slows down or speeds up the strength build-up. For optimum physical properties, mix with an airless mixing system. Hand mixers and portable power mixers are not suitable for this sealant, because they entrap air in the material, and this affects the physical properties of the cured sealant. Recommended mixing temperature range: from +20°C to +30°C.
- Apply the sealant only to a dry surface completely free from dirt, grease, mortar residues, previously applied sealants, ice and frost. Clean tools with isopropyl alcohol or mineral spirits. Once cured, the sealant can only be removed mechanically.
