Professional Structural Foam Adhesive DONEWELL® DOKKA K16

Professional Structural Foam Adhesive DONEWELL® DOKKA K16

DPP10B16SBHT

One-component polyurethane adhesive DONEWELL® DOKKA K16 with fast initial grab is characterized by high initial tack and low expansion and does not deform the bonded elements. For exterior and interior use.

Recommended for bonding drywall, OSB panels, roof tiles, baseboards, decorative elements, window sills and insulation of various types to concrete, brick, stone, metal, plastered, bitumen and wooden surfaces.

Well suited to assembling wooden structures and to building non-load-bearing partition walls of aerated concrete, gypsum tongue-and-groove blocks and cellular blocks. Speeds up finishing work considerably, is economical and easy to use. No priming required for most materials. Not for bonding mirrors or items made of polyethylene, polypropylene, PTFE or silicone.

  • The “Strong Grip” foam adhesive offers high initial tack, fast initial grab and uniform curing throughout the adhesive layer. Structural strength after 1 hour is over 500 kPa. Full cure time is 24 hours.**
  • Economy and efficiency: one can replaces 16 cartridges (310 ml) of construction adhesive, and “Strong Grip” costs several times less. The yield from one can is about 250 m of foam adhesive with a bead diameter of 10 mm**.
  • Production rate: changing and preparing 16 cartridges of construction adhesive takes about 15 minutes, a can of foam adhesive 20 seconds.
  • Ready to use, with no mixing or special preparation tools required. Propellant pressure dispenses the foam adhesive without the manual force required for cartridge adhesives.
  • Installation time is cut by 30-40% compared with traditional technology.
  • Versatility: the list of materials that can be bonded is much longer than for adhesive in cartridges.
  • An opened can stays usable for up to 30 days (with a gun in good order and with the storage requirements observed).
  • The valve design provides high resistance to sticking and reliable actuation.
  • Contains no harmful solvents or fillers. Cured adhesive is inert and safe to handle.

* At a temperature of +23°C and a relative humidity of 50%.

Item code: DPP10B16SBHT. CATEGORY:

Other products