The new line of adhesives and sealants

General purpose silicone sealant

SKU: KST-10X

Видео по продукту
 
New  

KUDO® high quality general purpose acetoxy cure silicone sealant is formulated for common household, renovation and construction projects. Designed to seal, join and protect non-porous surfaces from air and moisture penetration; for sealing window frames, door frames, cable ducts; sealing joints during the installation of plumbing equipment, air conditioning systems; protection of polyurethane foam from UV rays.

Characterized by excellent adhesion to stainless steel, anodized aluminum, glass, ceramic tiles, impregnated or varnished wood; most paints, and many plastics, such as epoxy, polyester, polyacrylate, and laminate. Fast skinning. Resistant to most detergents and cleaning agents, UV radiation, weathering, rapid temperature changes, and almost any aggressive media. Thixotropic, non-dripping, no migration during application.

Benefit

  • Resistant to UV radiation, cleaning agents and detergents.
  • Excellent adhesion to enameled and painted surfaces, glass, stainless steel, anodized aluminum, wood, PVC, porcelain, and other building materials.
  • High elasticity.
  • A cartridge covers 6-6,5 line meters of a 4×4 mm joint.
  • Operating temperature: from -40˚C to +180˚C.

Technical Information

Colors

Transparent KST-100, White KST-101

Adhesive/Sealant base

Silicone

Type

Sealants

Content

85 ml

Storage

Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. During transportation, freezing down to -20°C is allowed for a total duration of not more than 30 days.

Shelf life

2 years

How to use

  • It is advisable to conduct work at temperatures from +5˚C to +40˚C; the sealant temperature must be +20°C to +25°C.
  • Apply the sealant to clean, dry and degreased surfaces.
  • It is recommended that adjacent surfaces should be covered with masking tape to do the work cleanly.
  • Cut the tip from the cartridge above the screw thread, screw the dispensing nozzle onto the cartridge, unscrew the nozzle cap and trim the nozzle diagonally (at an angle of 45°) to fit the width of the joint.
  • Use a cartridge-operated gun for application.
  • Smooth down the sealant in the joint with a wet putty knife and remove the masking tape immediately after the smoothing.
  • Remove the sealant from tools and surfaces using a solvent (white spirit, or acetone) before the sealant has hardened.
  • Remove cured sealant using mechanical methods.
  • Skin Time – 10-12 minutes, sealant curing rate – 3 mm per day (at +23°C and 55% relative humidity).
  • Operating temperature: from -50˚C to +120˚C.
  • It is not recommended to use the sealant when dealing with natural stone (marble or granite), metal surfaces prone to corrosion (lead, copper, zinc, or brass), or concrete, cement, plastered surfaces, as well as when working with mirrors. Do not use for sealing aquariums and underwater joints. Do not paint over!!!

Questions and answers

No questions about this product yet...

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KST-10X. Categories: , Share: