Heavy-Duty Acrylic Construction Adhesive STRONG
KBT-341
High-quality multipurpose acrylic adhesive KUDO® STRONG is designed for fast, secure installation of parts made of wood, chipboard, fiberboard, EPS, XPS, PVC and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces.
KUDO® STRONG construction adhesive speeds up finishing work, is economical and easy to use. For interior and exterior use. Not recommended for bathrooms and shower enclosures. Solvent-free, non-toxic and non-flammable. Chemically neutral, does not corrode metals. Odorless. Easy to apply. Once fully cured, it can be painted with water-based and oil-based paints.
KBT 341, KBT-341
Colors
-
White
KBT 341
Benefits
- Initial tack: 100 kg/m² (10 g/cm²).
- High strength, water resistance and fast bonding.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC, ceramics, tile and other building materials.
- Speeds up finishing work. Economical and easy to apply.
- Resistant to UV radiation, cleaning agents and detergents.
- Chemically neutral, does not cause corrosion.
- Coverage: 15-16 linear meters with a 5 mm bead.
Additional information
| Colors | White KBT-341 |
|---|---|
| Full product name | Acrylic installation adhesive for strong mounting HOME “STRONG”, white, 200 ml |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 200 ml |
| Components | 1-component |
| Information on ingredients | styrene-acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. Up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at an ambient temperature from +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be dry and clean. One surface must be porous.
- Apply the adhesive as a continuous thin layer (up to 1 mm).
- Slide the part into place and press it firmly. Hold it in position for 1-2 minutes.
- Tack-free time: no more than 1 hour. Full strength is reached in 48 hours (depending on the porosity of the bonded materials) at 23±2°C and 50±5% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
