Acrylic Construction Adhesive for Invisible Bonding inv. MONTAGE
KBK-320
High quality multipurpose acrylic adhesive KUDO® “inv. MONTAGE” is designed for the fast and secure installation of items made of wood, chipboard, fiberboard, EPS, XPS, PVC and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces. Recommended for installing items made of glass, colored ceramics, wood, etc. Dries to an elastic, transparent film.
KUDO® “inv. MONTAGE” construction adhesive (“liquid nails”) speeds up finishing work, is economical and easy to use. Intended for indoor use. Solvent-free, non-toxic and non-flammable. Chemically neutral, does not corrode metals. Odorless. Easy to apply. Once fully cured, it can be painted over with water-based and oil-based paints.
KBK 320, KBK-320
Colors
-
Transparent
KBK 320
Benefits
- Initial tack — 8 g/cm² (80 kg/m²).
- Resistant to UV radiation, cleaning agents and detergents.
- Excellent adhesion to concrete, brick, stone, drywall, glass, wood, PVC and other building materials.
- Speeds up finishing work. Economical and easy to use.
- Chemically neutral, does not cause corrosion.
- Coverage — 20-22 linear meters with a 4 mm bead.
- Invisible bond line. The adhesive is a milky white viscous liquid that dries to an elastic, transparent film.
Additional information
| Colors | Transparent KBK-320 |
|---|---|
| Full product name | Acrylic installation adhesive for invisible mounting HOME “MONTAGE”, transparent, 280 ml |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 280 ml |
| Components | 1-component |
| Information on ingredients | acrylic dispersion, plasticizer, functional additives. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. Up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at a temperature of +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be clean and dry. One of the surfaces must be porous.
- Apply the adhesive in a continuous thin layer (up to 1 mm).
- Slide the part into place and press it firmly. Hold it for 1-2 minutes.
- Tack-free time is no more than 1 hour. Full strength is reached after 48 hours (depending on the porosity of the bonded materials) at 23±2°C and 50±5% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
