Acrylic Construction Adhesive for Secure Fixing MONTAGE
KBT-321
High-quality multipurpose acrylic adhesive KUDO® MONTAGE is designed for fast, secure installation of parts made of wood, chipboard, fiberboard, EPS, XPS, PVC and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces. Recommended for baseboards, window reveals, door casings, etc.
KUDO® MONTAGE construction adhesive speeds up finishing work, is economical and easy to use. For interior use. Not recommended for bathrooms and shower enclosures. Solvent-free, non-toxic and non-flammable. Chemically neutral, does not corrode metals. Odorless. Easy to apply. Once fully cured, it can be painted with water-based and oil-based paints.
KBT 321, KBT-321
Colors
-
White
KBT 321
Benefits
- Initial tack: 80 kg/m² (8 g/cm²).
- High strength and water resistance.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC, ceramics, tile and other building materials.
- Speeds up finishing work. Economical and easy to apply.
- Resistant to UV radiation, cleaning agents and detergents.
- Chemically neutral, does not cause corrosion.
- Coverage: 15-16 linear meters with a 5 mm bead.
Additional information
| Colors | White KBT-321 |
|---|---|
| Full product name | Acrylic installation adhesive for secure mounting HOME “MONTAGE”, white, 200 ml |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 200 ml |
| Components | 1-component |
| Information on ingredients | styrene-acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. Up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at an ambient temperature from +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be dry and clean. One surface must be porous.
- Apply the adhesive as a continuous thin layer (up to 1 mm).
- Slide the part into place and press it firmly. Hold it in position for 1-2 minutes.
- Tack-free time: no more than 1 hour. Full strength is reached in 48 hours (depending on the porosity of the bonded materials) at 23±2°C and 50±5% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
