Fast-Setting Acrylic Construction Adhesive TURBO
KBK-331
High quality specialty acrylic adhesive KUDO® “TURBO” is designed for the fast and secure fixing of items made of most building materials on concrete, brick, stone, plastered and wooden surfaces. Suitable for installing items made of wood, chipboard, fiberboard, EPS, XPS, PVC and UPVC on concrete, brick, stone, metal, plastered and wooden surfaces. Recommended for installing wall panels, ceramics, parquet, etc.
KUDO® “TURBO” construction adhesive (“liquid nails”) with its high initial tack considerably speeds up finishing work, is economical and easy to use. Suitable for indoor and outdoor use. Chemically neutral, does not corrode metals. Odorless. Easy to apply. Once fully cured, it can be painted over with water-based and oil-based paints.
KBK 331, KBK-331
Colors
-
White
KBK 331
Benefits
- Initial tack — 20 g/cm² (200 kg/m²).
- Considerably speeds up finishing work.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC and other building materials.
- Speeds up finishing work. Economical and easy to use.
- Resistant to UV radiation, cleaning agents and detergents.
- Chemically neutral, does not cause corrosion.
- Coverage — 20-22 linear meters with a 4 mm bead.
Additional information
| Colors | White KBK-331 |
|---|---|
| Full product name | Acrylic installation adhesive for fast mounting HOME “TURBO” |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 280 ml |
| Components | 1-component |
| Information on ingredients | acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. Up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at a temperature of +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be clean and dry. One of the surfaces must be porous.
- Apply the adhesive in a continuous thin layer (up to 1 mm).
- Slide the part into place and press it firmly. Hold it for 1-2 minutes.
- Tack-free time is no more than 1 hour. Full strength is reached after 48 hours (depending on the porosity of the bonded materials) at 23±2°C and 50±5% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
