Acrylic Molding Adhesive and Filler
KBK-371
Intended for work with all kinds of ceiling moldings and decorative items made of stone, polyurethane, gypsum, drywall, polystyrene, etc.
KUDO® molding adhesive and filler has excellent adhesion to wood, plaster, concrete, brick and other building materials.
For interior use. Mold and mildew resistant; it will not crack, crumble or yellow. Solvent-free and odorless. Once fully dry, it can be painted with water-based and oil-based paints.
KBK 371, KBK-371
Colors
-
White
KBK 371
Benefits
- Resistant to UV radiation, cleaning agents and detergents.
- Excellent adhesion to concrete, brick, stone, drywall, wood, PVC and other building materials.
- Chemically neutral, does not cause corrosion.
- Tack-free time: no more than 1 hour.
- Coverage: 20-22 linear meters with a 4 mm bead.
Additional information
| Colors | White KBK-371 |
|---|---|
| Full product name | Acrylic installation adhesive filler HOME |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 280 ml |
| Components | 1-component |
| Information on ingredients | styrene-acrylic dispersion, plasticizer, mineral fillers, functional additives, pigments. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. During transportation, up to 7 freezing cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C. |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at an ambient temperature from +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be clean. The adhesive can be applied to dry or damp surfaces, but droplets of water are not allowed. One surface must be porous.
- The adhesive is ready to use. Do not thin it with water: this can change its properties. Keep the package airtight whenever the work is interrupted.
- Use a caulking gun for application.
- Tack-free time: 1 hour; the part can be repositioned within 30 minutes; full strength is reached in 48 hours at 23°C and 50% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
Important! Do not use in joints that are permanently under water. Do not use in high humidity (>70%).
