Fiber-Reinforced Acrylic Construction Adhesive POWER
KBK-351
High-quality fiber-reinforced multipurpose acrylic adhesive KUDO® POWER is designed for bonding parts made of wood, chipboard, fiberboard, EPS, XPS, PVC and UPVC to concrete, brick, stone, metal, plastered and wooden surfaces. Ideal for installing window sills, door frames, heavy sheet materials, panels, etc.
KUDO® POWER contains reinforcing fibers that form a mesh inside the bond line and give a particularly strong joint. It speeds up finishing work, is economical and easy to use. For interior and exterior use. Solvent-free, non-toxic and non-flammable. Chemically neutral, does not corrode metals. Odorless. Easy to apply. Once fully cured, it can be painted with water-based and oil-based paints.
KBK 351, KBK-351
Colors
-
White
KBK 351
Benefits
- Initial tack: 230 kg/m² (23 g/cm²).
- Suitable for vertical and horizontal surfaces.
- Fiber-reinforced: synthetic fibers spread through the bond line and form a reinforcing mesh.
- Excellent adhesion to concrete, brick, stone, drywall, glass, wood, PVC and other building materials.
- Resistant to UV radiation, cleaning agents and detergents.
- Speeds up finishing work. Economical and easy to apply.
- Chemically neutral, does not cause corrosion.
- Coverage: 20-22 linear meters with a 4 mm bead.
Additional information
| Colors | White KBK-351 |
|---|---|
| Full product name | Fiber-reinforced acrylic installation adhesive HOME “POWER”, white, 280 ml |
| Product type | Installation adhesives |
| Seasonality | All-season |
| Pack size | 280 ml |
| Components | 1-component |
| Information on ingredients | acrylic dispersion, plasticizer, mineral fillers, reinforcing fibers, functional additives, pigments. |
| Storage | Store in tightly closed original packaging at temperatures from +5°C to +25°C in a dry place. Up to 7 freeze-thaw cycles (each cycle not more than 1 day) down to -30°C are allowed, or a single freezing down to -30°C for not more than 7 days. Thaw without additional heating at +20 to +25°C |
| Shelf life | 2 years |
| Chemical base | Acrylic |
| Series | KUDO® HOME |
Application
- Apply at an ambient temperature from +5°C to +35°C; the temperature of the adhesive should be +20°C to +25°C.
- The surfaces to be bonded must be dry and clean. One surface must be porous.
- Apply the adhesive as a continuous thin layer (up to 1 mm).
- Slide the part into place and press it firmly. Hold it in position for 1-2 minutes.
- Tack-free time: no more than 1 hour. Full strength is reached in 48 hours (depending on the porosity of the bonded materials) at 23±2°C and 50±5% relative humidity.
- Remove excess uncured adhesive with a damp cloth or mechanically.
