- Mask surfaces that are not to be painted to protect them from overspray.
- For best results, apply the paint at an ambient temperature of at least +10°C.
- Shake the can well for 2-3 minutes before use, and for at least 1 minute after the mixing ball inside the can starts to rattle.
- Apply the paint on a clean, dry and degreased surface. For the best results and a more durable coating, it is recommended to apply the paint on previously primed surfaces. KUDO® Acrylic Spray Primer is recommended for priming the surface.
- Attention! The shade of the basecoat can be changed by using a primer of a different color: over a light primer the basecoat is lighter, over a dark one it is darker.
- Apply the paint from a distance of 25-30 cm in 2 thin coats, letting each coat dry for 10-15 minutes at a temperature of +20°C.
- Mask surfaces that are not to be painted to protect them from overspray.
- For best results, apply the paint at an ambient temperature of at least +10°C.
- Shake the can well for 2-3 minutes before use.
- Apply the top coat over the basecoat only; applying it on other surfaces does not guarantee the crackle effect.
- For fine cracks, the basecoat has to be covered completely with one thin, even coat of the top coat. Once applied, the top coat should look glossy and wet.
- For larger cracks, apply another 1-3 thin coats without waiting for the first coat of the top coat to dry. The size of the cracks depends directly on the thickness of the top coat: the thicker the coat, the larger the cracks. For cracks of the same size, the coat has to be of the same thickness over the whole surface. Note that on curves and uneven areas the crackle effect is usually more pronounced.
KUDO® CREATION
Our thanks for the filming location and props go to
the “Eksperimentalny Tsekh” creative workshop.
Sets, props and stage properties.
