Skeleton Caulking Gun for Joint Sealants
KUSGUN11
The KUDO® KUSGUN11 skeleton caulking gun is intended for applying sealants and construction adhesives in construction, installation and repair work. The lightweight open-frame body is made of steel. The galvanized steel hex rod gives the drive mechanism a long and reliable service life. The gun is dependable and simple to use, and takes standard cartridges of up to 310 ml.
Benefits
- Lightweight open-frame body.
- Made of steel.
- Galvanized steel hex rod.
- Takes standard cartridges of up to 310 ml.
Additional information
| Weight | 320 g |
|---|---|
| Product type | Caulking guns |
| Plunger disc diameter | 38 mm |
| Plunger stroke | 235 mm |
| Series | KUDO® HOME |
Application
- Cut off the top of the cartridge above the thread, screw on the nozzle, remove the cap and cut the nozzle at a 45° angle, to a diameter matching the joint width.
- Press the pressure-release lever at the back of the handle and pull the rod all the way out.
- Insert the cartridge into the body of the gun.
- Press the pressure-release lever and push the rod all the way into the cartridge.
- Apply the sealant by squeezing the trigger and moving the nozzle of the cartridge smoothly along the joint.
- To take the cartridge out, press the pressure-release lever, pull the rod all the way out and remove the cartridge.
