- Mask surfaces that are not to be painted to protect them from overspray.
- To ensure the best results, the paint should be applied at a temperature not lower than +10°C.
- Clean, dry, degrease, prime and sand the surfaces to be painted. KU-9102 Universal degreaser is recommended for degreasing and KUDO® Acrylic spray primer for priming the surface.
- Remove the cap from the can. To do this, insert a flat-blade screwdriver with a blade width of 7-10 mm into the opening in the cap. Turn the screwdriver a quarter turn, resting the blade on the rim of the can. Do not insert the screwdriver too deep, so that the dome of the can is not damaged.
- Shake the can well for 2-3 minutes before use.
- Spray the paint from a distance of 25-30 cm in 2-3 coats, avoiding runs, with intercoat drying of about 10 minutes. Touch-dry at +20°C is 15-20 minutes, ready to handle at +20°C is 2 hours.
Attention! After use, turn the can upside down and spray until the paint stops coming out in order to prevent the nozzle from clogging.
