To clean the gun internally from uncured foam:
- For best results, apply the product at an ambient temperature from 0°C to +35°C.
- Remove the protective cap from the can.
- Screw the can to the gun.
- Open the gun flow control screw. Fully depress the trigger and dispense cleaner for 5 seconds.
- Repeat 3 times.
- Close the flow control screw and carefully remove the cleaner can from the gun.
- Repeat the spraying if necessary.
To remove uncured foam from the outside of the gun, can valves, work surfaces and clothing:
- For best results, apply the product at an ambient temperature from 0°C to +35°C.
- Fit the spray head to the can valve. Supplied accessories may vary. When using the black adapter, hold the can upside down.
- Spray the cleaner on the contaminated spots.
- Remove any excess foam with a cloth.
Avoid spraying the cleaner on surfaces not stained with PU foam!
