FOAM&GUN CLEANER HOME
SKU: KUPH06C
New
KUDO® FOAM&GUN CLEANER is ideal for removing uncured PU foam. Easy to apply to hard-to-reach places. Low cost in use.
Before applying to plastic and painted surfaces, do a pre-test on an invisible spot of the surface!
Benefit
Effective cleaning:
- Inside and outside of the application gun
- Can valves
- Working surfaces
- Clothes
Technical Information
| Content | 650 ml |
|---|---|
| Units per box | 12 units |
| Foam type | Home |
| Shelf life | 1 year |
How to use
To clean the gun internally from uncured foam:
- For best results, apply the product at an ambient temperature from 0°C to +35°C.
- Remove the protective cap from the can.
- Screw the can to the gun.
- Turn the adjusting screw on the gun to open. Pull the gun trigger until it stops and spray the cleaner for 5 seconds.
- Repeat 3 times.
- Lock the adjusting screw and carefully remove the can from the gun.
- Repeat the spraying if necessary.
To clean the gun externally, can valves, working surfaces, clothes from uncured foam:
- For best results, apply the product at an ambient temperature from 0°C to +35°C.
- Insert the spray head into the can valve. (The manufacturer may vary the accessories of the can. For black adapter, the operating position of the can is UPSIDE DOWN).
- Spray the cleaner on the contaminated spots.
- Remove any excess foam with a cloth.
Avoid spraying the cleaner on surfaces not stained with PU foam!
