- Mask surfaces that are not to be treated to protect them from overspray. The best result is achieved when the varnish is applied to a tail light lens removed from the vehicle.
- For best results, apply the product at a minimum ambient temperature of +10°C.
- Shake well for 2-3 minutes before use.
- Spray the varnish to a clean, dry and thoroughly degreased surface. It is recommended to use “KUDO® Silicone Remover” for surface degreasing.
- Spray the varnish from a distance of 25-30 cm in thin coats, with intercoat drying 10-15 minutes. The number of coats depends on the tint density required. Touch-dry at +20°C is 10-15 minutes. Ready to handle at +20°C – 2 hours.
Warning! After use, to avoid clogging the spray head, turn the can upside down and spray until the product stops coming out.
