- Prepare a dry, clean surface free from corrosion. Degrease with Universal Degreaser KU-9102.
- Mask surfaces that do not require painting.
- For best results, apply at a temperature of at least +10 °C.
- Remove the cap using a flat-blade screwdriver 7–10 mm wide: insert it into the cap opening and turn a quarter turn against the rim of the can. Do not insert it deeply enough to damage the dome.
- Shake vigorously for 2–3 minutes.
- Spray from 25–30 cm in 2 coats, allowing 10–15 minutes between coats.
- Touch dry in 15 minutes; fully dry in 24 hours at +20 °C.
Warning: After use, turn the can upside down and spray until no paint comes out to prevent the nozzle from clogging.
