RAL gloss alkyd spray paint

Technical Information

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• To ensure the best results, the composition should be applied at a minimum ambient temperature of +10°C.
• Shake the can well for 2-3 minutes before use.
• The compound should be applied to a clean, dry, degreased, pre-primed and sanded surface at a minimum ambient temperature of + 10°C. It is recommended that any KUDO® primer should be used for priming the surface.
• Spray 2-3 thin cross-coats – avoiding overspray – from a distance of 25-30 cm, letting each undercoat dry for 5-10 minutes. Dry to Touch time is a minimum of 40 minutes at +20°С. Dry to Handle time at +20°С — 5 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed. It is advisable to take a look at the table of appropriate material combinations before use.