RAL alkyd spray paint

Technical Information

The unique «3^P» (Professional Precision Painting) state-of-the-art technology ensures a professional-grade spray swath, enabling a high enamel deposition rate with maximum paint coating accuracy control.

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• To ensure the best results, the enamel should be applied at a minimum ambient temperature of +10°C.
• Shake the can well for 2-3 minutes before use.
• Select the required spray direction (either a vertical or horizontal spray pattern at any pitch) by turning the nozzle of the spray head.
• Apply the enamel to a clean, dry, pre-primed and sanded surface. It also can be applied over old lacquers (glossy coatings must be preliminarily matted with sandpaper). KUDO® Alkyd Primer is recommended for surface priming.
• Spray 2-3 thin cross-coats from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. Dry to Touch time is a minimum of 40 minutes at +20°С. Dry to Handle time at +20°С is a minimum of 5 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed. It is advisable to take a look at the table of appropriate material combinations before use.