The new line of adhesives and sealants

RAL alkyd spray paint

SKU: KU-1XXX.2

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Эмаль универсальная RAL 140 мл
Видео по продукту
 
New  

High Quality General Purpose Alkyd Spray Paint (Enamel) is designed for painting pre-primed metal and wood surfaces. The spray paint can be easily applied to hard-to-reach places.

Forms a durable coating with good coverage properties, is weather resistant, and has excellent adhesion to the surface being treated. Has high hardness, is lightfast and solvent resistant.

Suitable for both indoor and outdoor use.

Technical Information

Base

Alkyd

Surface

Gloss, Matt

Intercoat drying

10-15 min

Dry to touch

40 min

Dry to handle

5 hours

For use on

Metal, Wood, Plastic, Painted surface

Coverage

≈ 0,5 м²

Content

140 ml

information on ingredients

модифицированная алкидная смола, пигменты, наполнители, функциональные добавки, ксилол, метилацетат, бутанол, пропан, бутан

Shelf life

8 years

Technical conditions

20.30.12-025-53934955-2017

  • In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
  • To ensure the best results, the enamel should be applied at a minimum ambient temperature of +10°C.
  • Shake the can well for 2-3 minutes before use.
  • Select the required spray direction (either a vertical or horizontal spray pattern at any pitch) by turning the nozzle of the spray head.
  • Apply the enamel to a clean, dry, pre-primed and sanded surface. It also can be applied over old lacquers (glossy coatings must be preliminarily matted with sandpaper). KUDO® Alkyd Primer is recommended for surface priming.
  • Spray 2-3 thin cross-coats from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. Dry to Touch time is a minimum of 40 minutes at +20°С. Dry to Handle time at +20°С is a minimum of 5 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed. It is advisable to take a look at the table of appropriate material combinations before use.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KU-1XXX.2. Categorie: Share: