The new line of adhesives and sealants

Enamel for calipers

SKU: KU-521x

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Эмаль для суппортов
Видео по продукту
 
Эмаль для суппортов
 

The Enamel for calipers is intended for painting calipers and brake drums of vehicles and motorbikes. The product has components improving the paint coating's durability against the abrasive effects of sand, flying stones and the corrosive effects of water and road chemicals.

It provides a high gloss and excellent adhesion to the surface to be painted. High covering properties, excellent weather and heat resistance (up to +120°C). The paint can be sprayed on metal, no primer is required.

Technical Information

Base

Alkyd
Surface

Gloss
Intercoat drying

10-15 min
Dry to touch

50-60 min
Dry to handle

24 hours
For use on

Metal, Painted surface
Coverage

≈ 2 м²
Content

520 ml
Units per box

6 units
Box dimensions

205х137х205 mm
Box weight

2,321 kg
information on ingredients

модифицированная алкидная смола, неорганические пигменты, наполнители, функциональные добавки, ксилол, метилацетат, бутанол, пропан, бутан
Shelf life

5 years
Technical conditions

20.30.12-025-53934955-2017
  • In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
  • For best results, apply the product at a minimum ambient temperature of +10°C.
  • Shake well for 2-3 minutes before use.
  • Spray the paint to a clean, thoroughly degreased and primed surface. It is recommended to use “KUDO® Silicone Remover” for surface degreasing.
  • Spray the paint from a distance of 25-30 cm, in 2-3 paint coats, avoiding overspray, with intercoat drying 10-15 minutes. Dry to touch at +20°C is 50-60 minutes. Dry to handle at +20°C – 24 hours.

Warning! After use, to avoid clogging the spray head, turn the can upside down and spray until the paint stops coming out.

Note! Apply next coats of paints to non metallic colours no later than 2 hours or no earlier than 2 weeks. No additional varnish coating is required.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

Safety Data Sheet
SKU: KU-521x. Categories: , Share: