- Mask surfaces that are not to be treated to protect them from overspray.
- For best results, apply the product at a minimum ambient temperature of +10°C.
- Shake well for 1-2 minutes before use.
- Before the primer is applied, the surfaces should be cleaned, dried and degreased. For degreasing, Silicone Remover KUDO® is recommended.
- Spray the primer from a distance of 25-30 cm in an even layer. Touch-dry at +20°C is 20 minutes.
Note: the adhesion promoter contains metallic powder as an application indicator. A fully opaque layer is not required.
Warning! After use, to avoid clogging the spray head, turn the can upside down and spray until the primer stops coming out.
