Glitter effect acrylic spray paint

Technical Information

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• To ensure the best results, the enamel should be used at a minimum temperature of +10°C.
• Clean, dry, and degrease surfaces before painting. KU‑9102 General Purpose Degreaser is recommended for surface degreasing.
• Shake the can well for 2-3 minutes before use. Repeat shaking from time to time during the painting process.
• Spray thin even cross-coats – avoiding overspray – from a distance of 25-30 cm, letting each undercoat dry for 5-10 minutes. Dry to Touch time at +20°С — 20-25 minutes. Dry to Handle time at +20°С — 2 hours.
• The final decorative effect depends on the color of the product to be painted and the number of applied coats. It is recommended that KUDO® acrylic primers and enamels should be used for creating an undercoat of a desired color. Glitter Effect should be applied after the undercoat dries to handle.
• It is recommended to apply 1-2 coats of KUDO^® Acrylic Varnish over the enamel (after it dries to handle) for additional protection.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.