The new line of adhesives and sealants

Rust stop protective spray 3 in 1

SKU: KU-31xxxx

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Эмаль гладкая матовая по ржавчине
Видео по продукту
 
Эмаль гладкая матовая по ржавчине
 

KUDO® High Quality Synthetic Paint is designed for painting ferrous alloys, exposed to corrosion and rust. The combination of functions of a rust neutralizer, properties of a primer, and the decorative qualities of paint (3-in-1) greatly reduces the time required to secure a protective coating.

It is particularly useful when painting complex profile parts and structures, which are difficult to clean and sand. Provides long-term protection of the painted surface and has high decorative properties due to good coverage, excellent adhesion, and high weather resistance. This smooth matt Direct to Rust Metal Spray Primer&Paint can be easily applied to hard-to-reach areas. Suitable for both indoor and outdoor use.

Show all colors

Technical Information

Base

Alkyd
Surface

Matt
Intercoat drying

10-15 min
Dry to touch

30 min
Dry to handle

2 hours
For use on

Metal, Painted surface with rust stains
Coverage

≈ 2 м²
Content

520 ml
Units per box

12 units
Box dimensions

270x205x207 mm
Box weight

4,641 kg
information on ingredients

синтетические смолы, пигменты, наполнители, функциональные добавки, ингибиторы коррозии, метилацетат, ксилол, диметиловый эфир
Shelf life

5 years
Technical conditions

20.30.12-025-53934955-2017
  • In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
  • To ensure the best results, the enamel should be applied at a minimum temperature of +10°C.
  • Shake the can well for 2-3 minutes before use.
  • Spray 2 cross-coats from a distance of 25-30 cm onto a degreased surface free of loose rust, letting each undercoat dry for 10-15 minutes.
  • Dry to Handle time at +20°С — at least 2 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

Safety Data Sheet
SKU: KU-31xxxx. Categories: , , Share: