Fluor effect acrylic spray paint

Technical Information

Important! The enamel should only be applied over a layer of white primer. Otherwise, the best fluorescent effect will not be achieved.

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• To ensure the best results, the enamel should be applied at a minimum temperature of +10°C.
• Shake the can well for 2-3 minutes before use.
• The enamel should be applied over a degreased, cleaned, primed, and polished surface. KUDO® General Purpose Acrylic Primer is recommended for surface priming.
• Spray 2-3 thin cross-coats from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. The drying time for the final layer is a minimum of 30 minutes at a temperature of +20°C.

In order to improve the resistance to external influences, it is recommended that a finishing coat of clear varnish should be applied over the painted surface. It is recommended that KUDO^® General Purpose Acrylic Varnish should be used for this purpose.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.