- Mask surfaces that are not to be treated to protect them from overspray.
- To ensure the best results, the enamel should be applied at a minimum temperature of +10°C.
- Shake the can well for 2-3 minutes before use.
- The enamel should be applied onto a clean, degreased and sanded dry surface. KUDO® Silicone Remover is recommended for surface degreasing.
- Spray 2-3 thin cross-coats from a distance of 25-30 cm, allowing each coat to dry for 10-15 minutes at a temperature of +20°C. Ready to handle at +20°C in 24 hours. The refinished bathtub should not be used earlier than 72 hours after the coating application.
Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.
