- Mask surfaces that are not to be treated to protect them from overspray.
- For best results, apply the enamel at an ambient temperature of at least +10°C.
- Shake the can well for 1-2 minutes before use.
- Prior to treating, plastic surfaces must be cleaned, dried and degreased. KUDO® Silicone Remover is recommended for surface pretreatment.
- Spray evenly from a distance of 25-30 cm. Drying time at +20°C is 20 minutes.
Attention! After use, turn the can upside down and press the spray head (nozzle) until the composition stops coming out in order to prevent the nozzle from clogging.
