Alkyd spray primer

Technical Information

• In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
• To ensure the best results, the primer should be applied at a minimum ambient temperature of +10°C.
• Shake the can well for 2-3 minutes before use.
• Spray 2 thin cross-coats on a clean and degreased surface from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. Dry to Handle time at +20°C — 2 hours. It is advisable to apply a finishing enamel coat immediately after the primer has dried.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the compound stops coming out in order to prevent the nozzle from clogging.

To preserve the texture on a wooden surface, KU-9009 Clear Matt Nitrocellulose Lacquer Aerosol is recommended for priming.

If additional sanding of the primer is required after application, an acrylic primer or filler should be used (can be used over an alkyd primer). It can be applied in thick layers, dries quickly, and is highly sandable. Alkyd primer is not good for subsequent sanding. When applied in a thick layer, it will dry for a very long time.