The new line of adhesives and sealants

Anti slip coating spray

SKU: KU-5401

Антискользящее покрытие KU-5401
Видео по продукту
 
New  

The high-quality composition is designed for forming a long-term wear-resistant non-slip coating on steps, paving slabs, floors, hand tools, truck body, etc. Makes slippery and wet surfaces comfortable and safe to walk on. Ideal as a non-slip coating for floors, ramps, the steps of staircases, as well as entrance lobby stairs, walkways, showers, and pool edges.

KUDO® KU‑5401 Anti-Slip Spray protects against mechanical damage. Dries quickly, forms a clear, even waterproof membrane, and has excellent adhesion to metal, wood, ceramic and stone tiles, mosaics, granite, marble, concrete, glazed brick, plastic, and other smooth surfaces. Suitable for both outdoor and indoor use.

Technical Information

Base

Synthetic resins

Intercoat drying

10-15 min

Dry to handle

2 hours

For use on

Metal, Plastic, Stone

Content

520 ml

Units per box

6-sht

Состав

модифицированные синтетические смолы, функциональные добавки, ксилол, метилацетат, пропан, бутан, диметиловый эфир

Shelf life

3 years

Technical conditions

20.30.12-025-53934955-2017

  • It is recommended that surfaces not intended for treatment be covered to prevent traces of the aerosol appearing on them.
  • To ensure the best results, the composition should be applied to a clean, dry, and degreased surface at a minimum ambient temperature of +10°C. KUDO® General Purpose Degreaser is recommended for surface cleaning.
  • Shake the can well for 2-3 minutes before use.
  • Spray 2-3 thin cross-coats – avoiding overspray – from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at +20°C.
  • Anti-slip coating in intense foot traffic areas requires periodic renewal. To do this, simply clean the surface and apply additional coats.
  • Shake the can from time to time when in use. After use, turn the can upside down and press the spray head (nozzle) until the composition stops coming out in order to prevent the nozzle from clogging.
  • Dry to Handle time at +20°C – 2 hours.

Attention! Non-removable! Not intended as a temporary coating for car paintwork.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KU-5401. Share: