The new line of adhesives and sealants

Alkyd matt spray varnish

SKU: KU-9005

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Лак яхтный универсальный шелковисто-матовый
Видео по продукту
 
 

KUDO® KU-9005 Silky Matt Universal Yacht Varnish is based on alkyd urethane resin. Creates a silky matt finish. Designed for protective and decorative treatment of timber decking, deck superstructures, spars and other wooden surfaces in all types of river and sea vessels.

Also suitable for varnishing wood-paneled walls and ceilings, doors, plank and parquet floors, window frames, shutters, railings, interior details, garden furniture and other interior and exterior wooden surfaces used indoors and outdoors, including in extreme environmental exposure conditions. Protects wood from biological threats: blue stain, mold, decay, fungi, and wood-damaging insects.

Suitable for applying to metal surfaces and surfaces previously painted with alkyd, epoxy, or urethane alkyd enamels. The finish can endure the harshest weather, and long-time exposure to both fresh and salt water, as well as household detergents, and is resistant to mechanical stress and abrasion.

Technical Information

Base

Urethane alkyd

Surface

Matt

Intercoat drying

10-15 min

Dry to touch

30 min

Dry to handle

3 hours

For use on

Metal, Wood

Coverage

≈ 2 м²

Content

520 ml

Units per box

12 units

Box dimensions

270x205x207 mm

Box weight

4,196 kg

information on ingredients

модифицированные алкидно-уретановые олигомеры, функциональные добавки, ксилол, метил­ацетат, бутанол, пропан, бутан, диметиловый эфир

Shelf life

5 years

Technical conditions

20.30.12-025-53934955-2017

  • It is recommended that surfaces not intended for varnishing be protected to prevent traces of aerosol paint appearing on them.
  • To ensure the best results, the composition should be applied at a minimum ambient temperature of +10°C.
  • Shake the can well for 1-2 minutes before use.
  • Spray 2-3 thin cross-coats – avoiding overspray – from a distance of 25-30 cm on a clean, dry, and thoroughly degreased surface, letting each undercoat dry for 10-15 minutes. Dry to Touch time at +20°С in approximately 30 minutes. Dry to Handle time at +20°С – at least 3 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the composition stops coming out in order to prevent the nozzle from clogging.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KU-9005. Share: