The new line of adhesives and sealants

Radiator spray alkyd paint

SKU: KU-510X

Alkyd baseBefore use, we recommend reading the table of correct material combinations
Эмаль для радиаторов отопления
 
 

KUDO® high quality alkyd paint is intended for protective and decorative painting of heating systems (heaters, radiators, water pipes). The paint is fast-drying and has high covering properties. It is excellent for painting new surfaces as well as for repairing old ones.

After drying, it forms a durable, weather-resistant coating with high hardness and long service life. It can withstand heating up to +80°C for the whole service life of the painted element.

The coating has good resistance to impact, bending and other mechanical effects. Resistant to short-term exposure to water, ethylene glycol-based coolants and household detergents.

Technical Information

Base

Alkyd

Surface

Gloss, Matt

Intercoat drying

10-15 min

Dry to touch

60-80 min

Dry to handle

12 hours

For use on

Metal, Painted surface

Coverage

≈ 2 м²

Content

520 ml

Units per box

6 units

Box dimensions

205х137х205 mm

Box weight

2,321 kg

information on ingredients

модифицированная алкидная смола, пигменты, наполнители, функциональные добавки, ксилол, метилацетат, бутанол, пропан, бутан, диметиловый эфир

Shelf life

5 years

Technical conditions

20.30.12-025-53934955-2017

  • In order to avoid traces of aerosol, it is recommended to protect surfaces that are not to be treated.
  • To ensure the best results, the enamel should be applied at a minimum ambient temperature of +10°C.
  • Shake the can well for 2-3 minutes before use.
  • Spray 2-3 thin cross-coats to a clean, degreased and primed surface from a distance of 25-30 cm, letting each undercoat dry for 10-15 minutes at a temperature of +20°C. Dry to Touch time at +20°С is at least 1 hour. Dry to Handle time at +20°С is 12 hours.

Attention! After use, turn the can upside down and press the spray head (nozzle) until the enamel stops coming out in order to prevent the nozzle from clogging.

Important! The next coats of lacquer should be applied either not later than 2 hours, or not earlier than 2 weeks. No additional varnishing is needed.

No questions about this product yet...

Ask the question

Dear users, please note that in this section our specialists only answer questions related to the use of the products.
We are a manufacturing company that sells its products exclusively through a dealer network, for dealership, please use feedback form.
By clicking the "Submit" button, you consent to the processing of your personal data.

SKU: KU-510X. Categorie: Share: